Monday, October 4, 2021

WorkHorse Printer Y-Carriage Assembly

 WorkHorse Printer Y-Carriage Assembly

Aluminum Y-Carriage for the WorkHorse 3D Printer

The Y-axis carriage design for the WorkHorse 3D Printer has been updated. This carriage design will fit on the Workhorse V1 and V2 designs. The carriage mounts to MGN12h linear rails which have a 20mm x 20mm hole pattern.

  • More M3 Taped Holes
  • New Hotend and Extruder Mounting Locations

WorkHorse V2

Workhorse Large Scale 3D Printer











at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

SolidCore Gantry Design

Gantry CAD Design

  • CoreXY Belt Routing
    CoreXY Belt Routing  Belt Path Crossing While the SolidCore 3D Printer design had a lot of influence from the Railcore's design, which a...
  • VzBot 3D Printer
     VzBot 3D Printer The VZbot is a very new corexy 3d printer project by Simon Vezina of Vez3D. The VzBot Printer is a high-speed 3d printer w...
  • Stepper Motor Holding Torque
    Stepper Motor Holding Torque This is the maximum torque that the motor can provide with both windings energized at full current before it st...