Tuesday, October 5, 2021

WorkHorse Printer-Z-Axis Design

WorkHorse Printer-Z-Axis Design

We’re experimenting with changing the frame size of the WorkHorse 3D Printer. We're now using a 3030 extrusion profile. We also made the side panels two inches wider to have more room in the electronics / Filament compartment.

Z-Motor Mount Sizes

Nema 23 Mount

3030 Frame
2020 Frame
2040 Frame

Nema 17 Mount

2020 Frame
2040 Frame




Z-Axis Lead Screw To Gantry Plate Mount



The old version of the lead screw nut mounts were 3d printed. They would crack over time so the version is now made from aluminum.

Old Z-Axis Lead Screw To Gantry Mount



Related Content


at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

SolidCore Gantry Design

Gantry CAD Design

  • CoreXY Belt Routing
    CoreXY Belt Routing  Belt Path Crossing While the SolidCore 3D Printer design had a lot of influence from the Railcore's design, which a...
  • VzBot 3D Printer
     VzBot 3D Printer The VZbot is a very new corexy 3d printer project by Simon Vezina of Vez3D. The VzBot Printer is a high-speed 3d printer w...
  • Duet 2 Wifi Setup
    Duet 2 Wifi Setup Use this for your Workhorse Printer Setup but with Duet 3 Setup Connect the Duet to your PC with the USB cable provided....